Networking IDIOTS & Foolish Anupam

Network and its core concepts that has methods and logic with funny new alternatives but simplistic way

Wednesday, February 1, 2012

Basic overview of 802.1x authentication

This topic discusses in brief how .1x works in port based authentication.

No comments:

Newer Post Older Post Home

Subscribe to: Post Comments (Atom)

What's already in it?

► 2011 (3)
- ► December (3)

▼ 2012 (12)
- ▼ February (2)
  - Basic overview of 802.1x authentication
  - RIP version1 : #1
- ► June (1)
- ► July (2)
- ► August (4)
- ► September (2)
- ► November (1)

► 2013 (6)
- ► January (2)
- ► February (2)
- ► March (1)
- ► May (1)

Editor-Of-Blog

Anupam Pandey: I've an interest in networking and I feel like to make the exploring more adventurous we all must come up with great or so stupid logic and ideas through it so that no problem appears too big.

View my complete profile

Popular Posts

HSRP version 1 & 2 differences

Some good difference: 1.HSRP v2 learns, advertises millisecond times values which was missing in v1. 2. Vlan is increased ...
A simple example of EIGRP route manipulation using change in metric OR applying offset list.

In this example we have taken a setup which is more or less a simulation from cisco example but I have done a little modification to...
loop guard, root guard, bdpu filter, bpdu guard and UDLD

The loopguard - It is used to detect the loss of bpdu from a designated port to an alternate or root port. So suppose there are three switch...
IPsec within IPsec: Double tunnel site to site

The below example forms a site to site ipsec tunnel between R1 and R2. Once configured one more tunnel is formed between R4 ...
Stateful Protocol Analysis: By Karen Kent

An impressive article on how stateful basically works and what is it good for IDS. Must read for IDPS lovers; Network IDS part One Net...
(no title)
BGP weight attribute manipulation for best path

In this example we will try to manipulate the path choice based on weight metric. We've four routers R1 in AS100, R2 in AS 200, ...
simple spanning tree 802.1d, we have three ether switch on gns3

In this article of simple spanning tree 802.1d, we have three ether switch on gns3. Switch AAA has vlan bia(built-in-address) c400.0b...
IP accounting - Cisco Press

Read IP accounting, though not used much these days, but a nice feature on security and inspection level. Uses: 1. IP accounting L3 , ...
BGP Load balacing mechanism:

BGP when runs always rely on some IGP running protocol like dynamic protocols like OSPF, EIGRP or static and connected routes. So BGP for...

Pages

Home

© anupam. Simple theme. Theme images by centauria. Powered by Blogger.